ANSI B16.5 oghere ịgbado ọkụ flanges
Oghere ịgbado ọkụ socket yiri flange na-amị amị belụsọ na o nwere akụkụ na-enweghị ntụpọ. Ihe mgbochi dị ntakịrị karịa OD nke ọkpọkọ dakọtara, na-ekwe ka ịtinye ọkpọkọ n'ime flange yiri nkedo na-amị amị. Dayameta nke obere oghere bụ otu ihe ID nke ọkpọkọ kwekọrọ A na-ewu ihe mgbochi n'ime ala nke ọkpụkpụ nke na-esetịpụ dị ka ubu maka ọkpọkọ na-ezu ike. Nke a na-ewepụ mmachi ọ bụla na-asọpụta mgbe ị na-eji flange ịgbado ọkụ.
Ihe ndetu
(1) Maka 'Bore'(B1) na-abụghị Standard Wall ọkpụrụkpụ, rụtụ aka.
(2) Klas 150 flanges ma e wezụga Lap Joint ka a ga-eji 0.06" (1.6mm) ihu dị elu, nke agụnyere na 'Ọkpụrụkpụ' (t) na 'Length through Hub' (T1), (T2).
(3) Maka Slip-on, Threaded, Socket Welding na Lap Joint Flanges, enwere ike ịkpụzi oghere ahụ ma ọ bụ kwụ ọtọ site na isi ruo n'elu ma ọ bụ tapere n'ime oke ogo 7.
(4) Enwere ike iji otu oghere mee Flanges kpuru ìsì dị ka nke ejiri maka Slip-on Flanges ma ọ bụ enweghị oghere.
(5) The gasket elu na backside (agba elu maka bolting) na-mere ka yiri n'ime 1 ogo. Iji mezuo myirịta, ntụpọ chere ihu ka a na-eme dị ka MSS SP-9 si kwuo, na-ebelata oke (t).
(6) Omimi nke Socket (Y) bụ ANSI B16.5 kpuchie naanị na nha site na inch 3, ihe karịrị inch 3 dị na nhọrọ nrụpụta.
Ihe ndetu
(1) Maka 'Bore'(B1) na-abụghị Standard Wall ọkpụrụkpụ, rụtụ aka.
(2) Klas 300 flanges ma e wezụga Lap Joint ka a ga-eji ihu 0.06" (1.6mm) welitere, nke agụnyere na 'Ọkpụrụkpụ' (t) na 'Length through Hub' (T1), (T2).
(3) Maka Slip-on, Threaded, Socket Welding na Lap Joint Flanges, enwere ike ịkpụzi oghere ndị ahụ ma ọ bụ kwụ ọtọ site na ntọala ruo ma ọ bụ tinye ya n'ime oke ogo 7.
(4) Enwere ike iji otu oghere mee Flanges kpuru ìsì dị ka nke ejiri maka Slip-on Flanges ma ọ bụ enweghị oghere.
(5) The gasket elu na backside (agba elu maka bolting) na-mere ka yiri n'ime 1 ogo. Iji mezuo myirịta, ntụpọ chere ihu ka a na-eme dị ka MSS SP-9 si kwuo, na-ebelata oke (t).
(6) Omimi nke Socket (Y) bụ ANSI B16.5 kpuchie naanị na nha site na inch 3, ihe karịrị inch 3 dị na nhọrọ nrụpụta.
Ihe ndetu
(1) Maka n'ime dayameta nke ọkpọkọ (dakọtara na'Bore'(B1) nke Welding Neck Flanges), rụtụ aka a.
(2) Klas 600 flanges ma e wezụga Lap Joint ka a ga-eji ihu 0.25" (6.35mm) welitere, nke agụnyere na 'Ọkpụrụkpụ' (t) na 'Ogologo site na Hub' (T1), (T2).
(3) Maka Slip-on, Threaded and Lap joint Flanges, enwere ike ịkpụzi oghere ahụ ma ọ bụ kwụ ọtọ site na isi ruo n'elu ma ọ bụ tapere n'ime oke ogo 7.
(4) Flanges kpuru ìsì nwere ike iji otu oghere dị ka nke ejiri maka Slip-on Flanges ma ọ bụ enweghị oghere.
(5) The gasket elu na backside (agba elu maka bolting) na-mere ka yiri n'ime 1 ogo. Iji mezuo myirịta, a na-eme ntụpọ ihu dị ka MSS SP-9 si kwuo, na-enweghị ibelata ọkpụrụkpụ (t).
(6) Akụkụ nke nha 1/2 "site na 31/2" bụ otu maka klas 400 Flanges.
(7) Omimi nke Socket (Y) bụ ANSI B16.5 kpuchie naanị na nha site na inch 3, ihe karịrị inch 3 dị na nhọrọ nrụpụta.
Ihe ndetu
(1) Maka n'ime dayameta nke ọkpọkọ (dakọtara na'Bore'(B1) nke Welding Neck Flanges), rụtụ aka a.
(2) Klas 900 flanges ma e wezụga Lap Joint ka a ga-eji ihu 0.25" (6.35mm) welitere, nke agụnyere na 'Ọkpụrụkpụ' (t) na 'Ogologo site na Hub' (T1), (T2).
(3) Maka Slip-on, Threaded, and Lap Joint Flanges, enwere ike ịkpụzi oghere ndị ahụ ma ọ bụ kwụ ọtọ site na ntọala ruo n'elu ma ọ bụ tapere n'ime oke ogo 7.
(4) Enwere ike iji otu oghere mee Flanges kpuru ìsì dị ka nke ejiri maka Slip-on Flanges ma ọ bụ enweghị oghere.
(5) The gasket elu na backside (agba elu maka bolting) na-mere ka yiri n'ime 1 ogo. Iji mezuo myirịta, a na-eme ntụpọ ihu dị ka MSS SP-9 si kwuo, na-enweghị ibelata ọkpụrụkpụ (t).
(6) Akụkụ nke nha 1/2 "site na 21/2" bụ otu maka klas 1500 Flanges.
Ihe ndetu
(1) Maka n'ime dayameta nke ọkpọkọ (dakọtara na 'Bore'(B1) nke Welding Neck Flanges), rụtụ aka a.
(2) Klas 1500 flanges ma e wezụga Lap Joint ka a ga-eji 0.25" (6.35mm) welitere ihu, nke etinyeghị na 'ọkpụrụkpụ' (t) na 'ogologo site na Hub' (T1), (T2).
(3) Maka Slip-on, Threaded Lap Joint and Socket Welding Flanges, oghere nwere ike ịkpụzi ma ọ bụ kwụ ọtọ site na ntọala ruo n'elu ma ọ bụ tapere n'ime oke ogo 7.
(4) Enwere ike iji otu oghere mee Flanges kpuru ìsì dị ka nke ejiri maka Slip-on Flanges ma ọ bụ enweghị oghere.
(5) The gasket elu na backside (agba elu maka bolting) na-mere ka yiri n'ime 1 ogo. Iji mezuo myirịta, a na-emekwa ihu ihu dịka MSS SP-9 si kwuo, na-enweghị ibelata ọkpụrụkpụ (t).
(6) Akụkụ nke nha 1/2 "site na 21/2" bụ otu maka klas 900 Flanges.
(7) Omimi nke Socket (Y) kpuchiri ANSI B16.5 naanị na nha site na 21/2 inch, ihe karịrị 21/2 inch dị na nhọrọ onye nrụpụta.
Ihe ndetu
(1) Maka n'ime dayameta nke ọkpọkọ (dakọtara na 'Bore'(B1) nke Welding Neck Flanges.), Rụtụ aka a.
(2) Klas 2500 flanges ma e wezụga Lap Joint ka a ga-eji 0.25" (6.35mm) welitere ihu, nke gụnyere na Ọkpụrụkpụ (t) na 'Ogologo site na Hub' (T1), (T2).
(3) Maka Slip-on, Threaded and Lap Joint Flanges, enwere ike ịkpụzi oghere ahụ ma ọ bụ kwụ ọtọ site na ntọala ruo n'elu ma ọ bụ tapere n'ime oke ogo 7.
(4) Enwere ike iji otu oghere mee Flanges kpuru ìsì dị ka nke ejiri maka Slip-on Flanges ma ọ bụ enweghị oghere.
(5) The gasket elu na backside (agba elu maka bolting) na-mere ka yiri n'ime 1 ogo. Iji mezuo myirịta, a na-eme ntụpọ ihu dị ka MSS SP-9 si kwuo, na-enweghị ibelata ọkpụrụkpụ (t).
(6) Klas 2500 Slip-on Flanges anaghị ekpuchi ANSI B16.5, flanges na-amị amị dị na nhọrọ onye nrụpụta.